Select another country or region to view content for your location.

Dette websted bruger cookies

Vi bruger cookies til at vise dig det rigtige indhold til dit sprog og dine enheder (Nødvendigt), til at præsentere indhold, der er udvalgt til dig (Præferencer), til at analysere trafikken på vores websted (Statistik) og til at tilbyde dig vores bedste tilbud på andre websteder (Marketing).

Ved at klikke på "ACCEPTER" giver du dit samtykke til brugen af cookies. Du kan til enhver tid ændre eller tilbagekalde dine cookie-indstillinger i sidefoden under "Cookie-indstillinger". Du kan finde detaljerede oplysninger i vores politik om beskyttelse af personlige oplysninger.

Disse cookies er nødvendige for at vores websted kan fungere og kan ikke deaktiveres (f.eks. SessionCookies).

Disse cookies giver os bl.a. mulighed for at vise dig dine tidligere sete varer og anbefale lignende varer. Du kan finde flere oplysninger i vores og den respektive udbyders politik om beskyttelse af personlige oplysninger.

Vi har brug for disse cookies for at vise dig vores reklamer på andre websteder, f.eks. Hvis du deaktiverer dem, vil du i stedet få vist andre reklamer. Du kan finde flere oplysninger i vores og den respektive udbyders politik om beskyttelse af personlige oplysninger.

For at kunne indrette vores hjemmeside optimalt for dig og for at kunne forbedre den løbende bruger vi cookies. Ved at fortsætte med at bruge hjemmesiden accepterer du brugen af cookies. Du kan finde flere oplysninger om cookies i vores politik om beskyttelse af personlige oplysninger.

ofte stillede spørgsmål

What is the penetration depth for metal and electricity detectors?

This depends on the type of wall or ceiling and the size of the metal piece that is to be located. For this reason it's not possible to give a more precise answer. A water pipe can be recognised in the open at a distance of approx. 8-9 cm. This distance is reduced based on the construction material covering it. We recommend a test measurement of a similar piece whose distance is known to be akin to the one to be located.

What is the penetration depth for metal and electricity detectors?

How does the Special WMV detector search for wood?

The device is calibrated for the setting in which the wood is located. By moving the WMV along the wall, a change in the setting is sought. This, for example, is the case where wood is there. The WMV can recognise this. In order to rule out the possibility of the detected object being metal and not wood, a comparative measurement with a metal detector should also be conducted. If the second device gives no reading, then it is wood.

Which conclusions can be drawn from the percentages displayed on the humidity detecting apparatus and how precise are they?

The moisture meter detects the relative moisture content between the two metal pins on the surface of the object measured. When determining the total moisture content of, for example, a brick, it cannot be deduced for certain as only at the surface area has been measured. Therefore there could be a higher moisture and consequently a higher conductivity between the pins which could display a higher percentage. The percentage rate on the display screen can ascertain, for example, whether different parts of a wall yield different humidity levels, and thus can locate damp spots or potential leaks. The measurement accuracy of the detector is +/- 3%.